home *** CD-ROM | disk | FTP | other *** search
- X-Mailer: Zodiac's Point 37.204 [REGISTERED 0165] via [DOS/NCBMail V2.22 REL.:200196]
- Message-ID: <zp0e60aCVjLCZ165@p0000126.r-m-b.gun.de>
- References: <554.6640T700T2490@burst.demon.co.uk> <4ikmk2$qrt@mapperley.innotts.co.uk>
- X-Gateway: ZCONNECT UU hhks.gun.de [DUUCP vom 01.07.1994]
- MIME-Version: 1.0
- Content-Type: text/plain; charset=ISO-8859-1
- Content-Transfer-Encoding: 8bit
- From: crow@r-m-b.gun.de (Boris Hinzer)
- Subject: Re: SS 3.4 and that damned '060
- Date: 23 Mar 1996 11:23:32 +0100
- Path: r-m-b.gun.de!crow
- Newsgroups: comp.sys.amiga.emulations
- Distribution: world
-
- helios@innotts.co.uk (Steve Wright) schrieb am 18.03.96
-
- SW> Lee@burst.demon.co.uk (Lee Huggett) wrote:
- SW>
- SW>
- SW> >Okay the new SS is out...
- SW>
- SW> >Wonderfull I thought I'll try to get it to work on my '060
- SW>
- SW> >NOPE, the damned thing still crashes when I try to run MAC programs.
- SW>
- SW> >I'm still stuck with V3.0, where I can turn off the FPU to make it work
- SW>
- SW> >Come on Christian I know a ew other people who can't get it to work on their
- SW> >'060s
- SW>
- SW> Anybody else got any ideas on this problem. I've got a cyberstorm 060
- SW> mk 1 board installed in a full tower and cannot get SS3.4/3.3 or any
- SW> other version to run. If I put the 030 card back all is okay. I got a
- SW> bit further on running the prog by switching data/instruction caches
- SW> off but then the emulator gives the following error message :-
- SW>
- SW> A/ROSE Prep INIT31- Failed to open driver
- SW>
- SW> Can anybody shed any light on this problem ???
-
- ...well I think so...refering to the support-box of shapeshifter you'll have to
- remove the A/Rose-Extension from your Mac System -> this one causes the
- trouble with the 060.
-
- cya
-
- Boris_Hinzer@neuss.netsurf.de / CROW@r-m-b.gun.de
-
- P.S: BTW System 7.5 & 7.5.1 run without ANY problems!
-